Rubber Air Hose

EPDM Air Hose

An economical air and water hose, for a wide range of industrial, construction and agricultural applications.

Flexible in extreme temperatures
Resistant to abrasion, weathering and ozone
240 PSI
Kink resistant
Not for steam use

Industrial
Construction
Agriculture

Product Specs
Material:	Spiral Synthetic Yarn, EPDM
Inside Diameter:	Min: 1/4" - Max: 1-1/2"
Temperature:	Low: -40° - High: 190°
Length:	This email address is being protected from spambots. You need JavaScript enabled to view it.

Nitrile Synthetic Rubber Air Hose

A good quality, economical general purpose hose for industrial air service, compressor lines, pneumatic tools, low-pressure spray where the need for oil resistance is moderate.

Suited for high temperature air handling applications
Nonconductive
Resistant to many oils & solvents, ozone, water, fungus & alkalis

Industrial
Construction

Nitrile Synthetic Rubber Air Hose Product Specs
Material:	Nitrile synthetic rubber
Inside Diameter:	Min: 5/8"
Temperature:	Low: -20° - High: 190°
Length:	This email address is being protected from spambots. You need JavaScript enabled to view it.

Nominal ID (IN)	Nominal ID (MM)	Nominal OD (IN)	Nominal OD (MM)	Max Working Pressure (PSI)	Max Working Pressure (MPA)	Weight_ (LB/FT)	Weight (KG/M)
5/8	15.9	1.02	25.9	300	2.07	0.33	0.49

Nominal ID (IN)	Nominal ID (MM)	Nominal OD (IN)	Nominal OD (MM)	Max Working Pressure (PSI)	Max Working Pressure (MPA)	Weight_ (LB/FT)	Weight (KG/M)
1/4	6.4	0.53	13.5	300	2.07	0.10	0.15
3/8	9.5	0.70	17.8	300	2.07	0.17	0.25
1/2	12.7	0.84	21.3	300	2.07	0.22	0.33
5/8	15.9	1.02	25.9	300	2.07	0.33	0.49
3/4	19.1	1.15	29.2	300	2.07	0.37	0.55
1	25.4	1.48	37.3	300	2.07	0.58	0.86
1-1/4	31.25	1.73	43.25	250	2.07	0.858	1.30
1-1/2	37.5	2.125	53.125	250	2.07	1.367	2.07

EPDM Class C Air Hose

An economical air and water hose, for a wide range of industrial, construction and agricultural applications.

Spiral synthetic yarn
Limited oil resistance
Not for steam use

Industrial
Construction
Agricultural

EPDM Class C Air Hose Product Specs
Material:	Spiral Synthetic Yarn, EPDM
Inside Diameter:	Min: 1/4" - Max: 1"
Temperature:	Low: -40° - High: 190°
Length:	This email address is being protected from spambots. You need JavaScript enabled to view it.

Nominal ID (IN)	Nominal ID (MM)	Nominal OD (IN)	Nominal OD (MM)	Max Working Pressure (PSI)	Max Working Pressure (MPA)	Weight_ (LB/FT)	Weight (KG/M)
1/4	6.4	0.53	13.5	300	2.07	0.10	0.15
3/8	9.5	0.70	17.8	300	2.07	0.17	0.25
1/2	12.7	0.84	21.3	300	2.07	0.22	0.33
3/4	19.1	1.15	29.2	300	2.07	0.37	0.55
1	25.4	1.48	37.3	300	2.07	0.58	0.86

Nitrile Class A Air Hose

A good quality, economical general purpose hose for industrial air service, compressor lines, pneumatic tools, low-pressure spray.

Moderate oil resistance
Spiral synthetic yarn
Not for steam use

Industrial
Construction
Agricultural

Nitrile Class A Air Hose Product Specs
Material:	Nitrile, Spiral Synthetic Yarn
Inside Diameter:	Min: 1/4" - Max: 2"
Temperature:	Low: -20° - High: 190°
Length:	This email address is being protected from spambots. You need JavaScript enabled to view it.

Nominal ID (IN)	Nominal ID (MM)	Nominal OD (IN)	Nominal OD (MM)	Max Working Pressure (PSI)	Max Working Pressure (MPA)	Weight_ (LB/FT)	Weight (KG/M)
1/4	6.4	0.54	13.7	300	2.07	0.14	0.21
3/8	9.5	0.69	17.5	300	2.07	0.19	0.28
1/2	12.7	0.86	21.8	300	2.07	0.26	0.39
5/8	15.9	1.02	25.9	300	2.07	0.33	0.49
3/4	19.1	1.19	30.2	300	2.07	0.42	0.63
1	19.1	1.50	38.1	300	2.07	0.62	0.92
1-1/4	31.8	1.77	45.6	250	1.72	0.84	1.25
1-1/2	38.1	2.08	53.2	250	1.72	1.04	1.55
2	50.8	2.50	63.5	300	2.07	1.02	1.52

EPDM Class B Air Hose

A tough, heavy duty general service hose.

Heavy duty
Abrasion and ozone resistant
Not for steam use

Industrial
Construction

Product Specs
Material:	Spiral Polyester, EPDM
Inside Diameter:	Min: 1-1/4" - Max: 2"
Temperature:	Low: -20° - High: 180°
Length:	This email address is being protected from spambots. You need JavaScript enabled to view it.